Cooling Mode of Condenser in High and Low Temperature Test Chamber

Cooling Mode of Condenser in High and Low Temperature Test Chamber

High and low temperature test chamber is a common temperature test equipment in environmental test equipment, which is suitable for high temperature and low temperature reliability test of industrial products. The working principle of refrigeration in the high and low temperature test chamber is that the refrigerant flows out of the condenser under high pressure, passes through the throttling mechanism (capillary, thermal expansion valve, etc.), reduces its pressure, and then enters the evaporator. When the refrigeration medium enters the evaporator, it is a two-phase mixture (liquid and gas), which evaporates and absorbs heat under low temperature conditions in the evaporator. It then enters the condenser, where heat is released and condensed into a liquid. Xenon lamp aging test chamber uses xenon lamp with long arc as light source, which can provide corresponding environmental simulation and accelerated test for scientific research, product development and quality control. The vehicle environment simulation laboratory can simulate the test environment of engine cold start, vehicle high and low temperature, wind, frost, rain, snow, vehicle emission test, etc.

According to different refrigeration media, the cooling mode of the high and low temperature test chamber condenser can be divided into three types: air cooling, water cooling and liquid nitrogen refrigeration. Their medium is refrigerant, water and liquid nitrogen. Different media correspond to different evaporation temperatures, the same medium under different evaporation pressure, evaporation temperature is not the same.

The different cooling methods of the condenser in the high and low temperature test chamber make the components of the refrigeration different. The air cooling method consists of compressor, various refrigeration accessories, condenser, oil separator and so on. The water cooling method consists of: chiller, cooling tower, freezing pump and auxiliary equipment. Liquid nitrogen is composed of: liquid nitrogen tank, pressure transmitter, pressure gauge, flow meter, level meter, ultra-low temperature solenoid valve and so on.

No matter what kind of cooling method is used in the high and low temperature test chamber condenser, high reliability and safety are the most basic requirements. Instrument test equipment of Lab Companion can provide a variety of condenser cooling methods according to customer needs.

In addition to the high and low temperature test chamber, instrument of Lab Companion also produces all kinds of temperature and humidity test chamber, constant temperature and humidity test equipment, aging chamber (ultraviolet, xenon lamp, ozone aging chamber), thermal shock test chamber, high temperature aging machine and other equipment, all the equipment is produced according to national standards and industry specifications.